• Assemble windows, doors, trusses, panels, stairs, or other building products
• Place parts in specified positions and fasten components together using tools and equipment
• Cut products to required measurements as needed
• Operate and tend machinery used in assembly and fastening processes
• Inspect products and remove defective materials when necessary
• Move between workstations based on production needs
• Maintain a clean and safe work area by following safety procedures

• No experience required; entry-level candidates welcome
• Prior carpentry or construction experience is helpful but not required
• Ability to read and follow simple instructions
• Ability to perform basic math and read a tape measure
• Ability to stand and walk throughout the shift
• Ability to lift up to 50 pounds frequently and up to 100 pounds occasionally
• Ability to work in a loud manufacturing environment and wear required PPE
• Willingness to work overtime as needed

• Load and unload trucks using a forklift with a slip sheet attachment
• Operate automatic bag loading and sewing equipment safely and efficiently
• Run robotic equipment to slip sheet, palletize, and wrap bagged products
• Maintain a clean warehouse by sweeping and performing general housekeeping duties
• Follow all food safety, employee safety, and operational procedures
• Complete assignments and tasks as directed by the Warehouse Foreman

• No experience required; entry-level candidates welcome
• Ability to stand and walk for extended periods throughout the shift
• Ability to occasionally lift and move up to 50-pound bags
• Ability to communicate effectively with supervisors and co-workers
• Ability to follow simple one- and two-step instructions
• Ability to work safely around warehouse equipment and machinery
• Reliable transportation to Park Rapids, MN

• Load and unload trucks using a forklift and slip sheet attachment
• Operate automatic bag loading and sewing equipment safely and efficiently
• Run robotic equipment used for slip sheeting, palletizing, and wrapping bags
• Follow assignments and directions provided by supervisors
• Maintain clean work areas and support food safety and housekeeping standards
• Assist with lifting and handling bagged product as needed
• Follow all workplace safety and food safety policies and procedures

• Ability to read simple words, recognize numbers, and communicate using basic sentences
• Ability to follow one- and two-step instructions and adapt to standardized work processes
• Ability to communicate effectively with supervisors and coworkers
• Ability to stand, walk, reach, balance, and handle materials throughout the shift
• Ability to occasionally stoop, kneel, or crouch
• Ability to lift 25-50 pounds with or without reasonable accommodations
• Ability to work in a safety-focused, food manufacturing environment
• Previous warehouse or forklift experience is helpful but not required

• Remove foreign material and non-standard products from processing equipment
• Trim defects from raw products
• Inspect raw and processed products to ensure quality
• Perform sanitation duties using pressure washers, scrub brushes, and scrapers during downtime and clean-up periods
• Work in temperature and humidity extremes

What You Need to Bring to the Food Production Associate Role:

• Ability to add, subtract, multiply, and divide using whole numbers
• Ability to communicate effectively with supervisors and peers
• Ability to lift 10 pounds frequently and up to 50 pounds occasionally (with or without reasonable accommodations)
• Ability to push/pull forces up to 100 pounds (with or without reasonable accommodations)
• Ability to climb stairs or ladders up to 60 feet occasionally
• Ability to bend, stoop, kneel, and walk up to a half-mile frequently #IndeedNorth

Why You'll Like Working with Doherty Staffing Solutions
Enjoy weekly pay, access to health coverage options through Benefits in a Card (including preventative and minimum value plans), and temp-to-hire opportunities for long-term stability where applicable. As a family-owned company with over 45 years in business, we pride ourselves on providing personalized support through a local, dedicated recruiter and maintaining a strong reputation backed by positive online ratings. We are committed to fostering an inclusive workplace and are proud to be an Equal Opportunity Employer, welcoming candidates from all backgrounds and experiences.Ready to Apply?
Click "Apply Now" to complete our quick, mobile-friendly application. For questions about the Food Production job, please contact our Bemidji jobs office at (952)-715-5210.Doherty Staffing Solutions offers our valued contract employees health coverage through Benefits in a Card (preventative benefit and minimum value plans), along with weekly paychecks via a prepaid card from CHANGE. Learn more and find helpful links to additional resources at www.doherty.com/job-seekers/employee-benefits.

• Work with Executive management, Operations, Project management, Sales, and Controls on client projects, expectations, and deliveries.
• Maintains a working knowledge of new technologies to improve Applications design and quoting time        
• Maintaining quoting schedules to meet delivery deadlines

• Follow RFQ processes
• Assist in developing RFQ standards and procedures
• Provide estimated cost of build for concept layouts
• Work directly with Customers and Sales Team to gather project information 
• Designs initial concept layouts of new equipment and systems using 2D AutoCAD
• Review concept layouts and designs with Customer and Sales team
• Read through customer specifications to provide Sales with accurate solution and scope on projects
• Assist in calculations to determine labor hours, material and outside services necessary to produce customers request for quote.
• Create complete project documentation for engineering to include drawings related to layout plans, elevation, data sheets and project specifications
• Manages kick-off meetings with Engineering & Controls once a project is approved
• Assist Sales on technical sales visits and project reviews
• Ability to travel to client sites to evaluate project scopes with or without your team when necessary

• To prioritize, organize and manage multiple projects simultaneously
• Read and interpret engineered plans and specifications.
• Flexibility to work overtime as required to meet established deadlines
• Attention to detail 

• Ability to follow through on tasks with minimal supervision
• Ability to work in a fast-paced environment
• Ability to work as part of a team
• Ability to multitask
• Professional attitude

• Insurance
• Dental Insurance
• Vision Insurance
• Short-Term Disability Insurance
• Company-paid Life Insurance & Long-Term Disability
• 401K Matching
• Profit Sharing
• Paid Time Off
• Supplemental Benefits – Accident, Cancer, Indemnity, Illness, and Legal Plan
• Employee Assistance Program
• #NewCareerByDoherty
• #DohertyNewCareer

• Read and interpret blueprints, schematics, assembly drawings, and parts lists to complete complex assemblies
• Assemble mechanical systems, conveyor equipment, and custom machinery to precise specifications
• Troubleshoot and resolve mechanical, fitment, alignment, and operational issues with minimal supervision
• Perform equipment setup, testing, alignment, and functional verification to ensure quality standards are met
• Train and mentor junior assemblers on assembly techniques, blueprint reading, safety practices, and quality expectations
• Safely rig, move, and position equipment and large assemblies throughout the facility
• Complete production and quality documentation while supporting continuous improvement initiatives

• High school diploma or equivalent required
• 7+ years of manufacturing, mechanical assembly, fabrication, or industrial equipment assembly experience preferred
• Ability to independently complete complex assembly work with minimal supervision
• Strong mechanical aptitude and advanced troubleshooting skills
• Experience reading and interpreting blueprints, technical drawings, and specifications
• Experience using hand tools, power tools, tape measures, and precision inspection equipment
• Ability to safely rig, lift, and move equipment in a manufacturing environment
• Strong communication skills and experience training or mentoring team members #WorkAtFriesen's

• Build and prepare pallets using pallet jacks, stretch-wrap equipment, and manual methods
• Load, stack, and organize finished goods and materials securely for transport or production use
• Apply labels, tags, and required documentation to pallets accurately
• Inspect pallets for stability, proper identification, and structural integrity
• Stage pallets in designated shipping and production areas
• Perform basic equipment checks and maintain clean, organized work areas
• Follow safety procedures and collaborate with warehouse, production, and logistics teams

• Ability to frequently lift and maneuver 40–50 pounds
• Ability to stand, walk, and work on your feet for extended shifts
• Mechanical aptitude and strong attention to detail
• Ability to read and understand a tape measure
• Basic troubleshooting and equipment maintenance skills
• Ability to work independently and as part of a team
• High school diploma or GED equivalent required
• Previous manufacturing, warehouse, shipping/receiving, material handling, or palletizing experience preferred
• Experience with pallet jacks, forklifts, stretch-wrap equipment, carpentry, or woodworking is a plus #WorkAtFriesen's

• Perform TIG welding on stainless steel components in multiple welding positions
• Layout, fit, and assemble materials according to blueprints and engineering drawings
• Set up and adjust welding equipment for various material thicknesses and alloys
• Inspect and maintain weld quality, consistency, and compliance with specifications
• Move and position materials using forklifts and hoists as needed
• Operate hand and power tools used in metal fabrication processes
• Maintain a clean, organized, and safe work environment while following PPE and safety requirements

• Minimum of 2 years of TIG welding experience in a manufacturing or fabrication environment
• Ability to read and interpret blueprints, drawings, and welding specifications
• Knowledge of welding positions, base materials, joint design, and welding procedures
• Ability to work independently with minimal supervision
• Strong math, problem-solving, and communication skills
• Ability to lift up to 50 pounds regularly
• Experience operating forklifts, hoists, and material handling equipment preferred
• Technical school welding certificate preferred
• Previous leadership or team lead experience is a plus
• Reliable transportation and ability to commute to Detroit Lakes, MN #WorkAtFriesen's

• Coordinate full-cycle recruitment activities, including job postings, candidate screening, interview scheduling, and candidate communications
• Conduct new hire orientation and onboarding while maintaining accurate recruitment and employee records
• Serve as a resource for employee questions regarding policies, benefits, and workplace concerns
• Support employee relations matters, investigations, conflict resolution, and employee engagement initiatives
• Assist with performance management processes, employee development programs, and training coordination
• Maintain HRIS records, process personnel changes, and prepare HR reports and metrics
• Ensure compliance with federal, state, and local employment laws, regulations, and company policies

• Bachelor's degree in Human Resources, Business Administration, or a related field preferred
• 2-5 years of Human Resources experience required
• Experience with recruitment, employee relations, benefits administration, and HR compliance preferred
• Strong knowledge of HR principles, employment laws, and HR best practices
• Excellent communication, interpersonal, organizational, and conflict-resolution skills
• Proficiency with Microsoft Office Suite and HRIS systems
• Ability to maintain confidentiality, exercise sound judgment, and effectively manage multiple priorities
• #NewCareerByDoherty

• Operate industrial sandblasting equipment on stainless steel surfaces and components
• Inspect finished parts to ensure they meet quality and specification requirements
• Load, move, and position materials and components within the blast bay
• Regulate abrasive flow and pressure settings during blasting operations
• Clean equipment and work areas while following established procedures
• Identify and report defects, impurities, or equipment concerns
• Follow all safety procedures and wear required PPE during operations

• Ability to stand for extended shifts in a manufacturing environment
• Ability to lift and maneuver 40–50 pounds frequently
• Strong attention to detail and commitment to quality workmanship
• Ability to read, understand, and follow work instructions
• Forklift experience or willingness to learn preferred
• High School Diploma or GED preferred
• Reliable transportation to Detroit Lakes, MN

• Review and follow work instruction, management system procedures and standard operating documents
• Run CNC and manual machines, and handheld tools
• Inspect parts and identify defects and non-conformities
• Consistently and accurately complete all related paperwork/documentation
• Monitor fluids in machine and coolant flow in machine
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean and safe work area
• Produce parts that meet the Company’s quality standards
• Actively participate in events to improve the safety, quality, and efficiencies of our current processes and procedures
• Work at a consistent and steady pace, be prepared to work each day, and report to assigned work center in a punctual manner
• Ensure a safe work environment for self and others
• Follow all safety rules and regulations

• High school diploma or GED
• Manufacturing experience preferred but not required
• Mechanical aptitude
• Basic math skills, must have a working knowledge of decimals
• Ability to read measuring instruments
• Ability to read and follow work instructions
• Must be detail oriented, with the ability to recognize defects and non-conformities
• Ability to work with limited supervision
• Good attendance
• Ability to safely operate a forklift
• Ability to lift up to 50 pounds with or without reasonable accommodations 

• Wire, assemble, and label custom control panels and electrical systems
• Wire and assist with programming motors and variable frequency drives (VFDs)
• Read and interpret electrical schematics, blueprints, and technical documentation
• Perform system testing, startups, and troubleshooting on completed equipment
• Install electrical components including switches, relays, circuit breakers, and control devices
• Measure, cut, bend, and install conduit using hand and power tools
• Test electrical continuity and system safety using meters, megohmmeters, and other testing equipment

• Minimum of 2 years of related experience or a 2-year technical degree in a related field
• Knowledge of electrical theory and AC/DC systems (110–480VAC and 24VDC)
• Experience reading and understanding electrical schematics and wiring diagrams
• Familiarity with motors, VFDs, electrical drives, and testing instruments
• Ability to lift up to 75 pounds as needed
• Strong troubleshooting, mechanical, and problem-solving skills
• Reliable transportation to the Detroit Lakes area

• Operate CNC lathes and milling machines to manufacture precision parts
• Read and interpret blueprints, technical drawings, and specifications
• Monitor machine performance and make offsets to maintain quality standards
• Perform quality inspections using calipers, micrometers, and precision measuring tools
• Troubleshoot machining, tooling, and material issues during production
• Set up and adjust CNC machines for different production runs
• Maintain a clean, organized, and safe work environment

• 1–2 years of CNC machining experience required
• Ability to safely and independently operate CNC lathes and milling machines
• Experience setting up and adjusting CNC equipment for production runs
• Proficiency using calipers, micrometers, and other precision measuring instruments
• Strong attention to detail and commitment to producing quality work
• Ability to troubleshoot minor mechanical and machining issues
• High School Diploma or equivalent required

• Answer incoming calls, determine purpose and forward calls to the appropriate department
• Greet on-site visitors, determine nature of business and announce visitors to appropriate personnel
• Monitor visual access and issue passes when required
• Assist tour facilitator with name badges and proper PPE for visitors
• Maintain and update PPE for plant associates when needed
• Update security badges for employees and contractors
• Update crew schedules on a daily basis including vacation coverage, call-ins, and temporary job assignments
• Perform other clerical duties as needed, such as filing, photocopying, faxing and collating

• High school diploma or GED and at least one year of clerical experience or equivalent combination of education and experience
• Bilingual in Spanish and English or willingness to learn
• Basic computer skills including Microsoft Word, Excel, and Outlook
• Typing speed of 40+ words per minute
• Excellent people skills and communication
• Ability to maintain confidentiality
• Ability to work overtime when necessary for workload and absences
• Associates degree in Business Administration, Human Resources, Accounting, or similar field preferred #IndeedNorth

• Keep finished products organized and located properly in warehouses
• Perform accurate and timely shipping, receiving, and movements of products
• Rotate ingredients and packaging in their proper locations after receiving
• Proper and accurate loading and unloading of trucks
• Reconcile inventory discrepancies as discovered
• Operate the shrink wrapper, cardboard bailer, etc.
• Perform physical and cycle counts of inventory
• Backup or substitute inventory control positions
• Identify opportunities for efficiency and productivity gains
• Report on any safety issues, unsafe conditions and accidents immediately

• Previous forklift and shuttle truck operation experience
• Certified and licensed to drive forklifts/trucks
• Understanding of warehousing programs and systems #IndeedNorth

• Compare material identification information to verify accuracy
• Load and unload trucks
• Complete inventory counts and document discrepancies
• Supply work centers with materials and packaging
• Stage products based on production reports
• Accurately complete reports and related paperwork
• Remove and empty scrap containers and dispose of material as needed
• Monitor production flow to prevent delays
• Communicate effectively with all departments
• Operate production machinery as assigned

• High school diploma or GED preferred
• 3+ months of warehouse experience preferred
• Ability to use computers for material movement processes
• Ability to operate shrink wrap machines, scales, and basic hand tools
• Ability to follow written work instructions
• Must obtain facility-specific forklift certification
• Reliable transportation to the Detroit Lakes area 

• Manage daily operations of the truck weigh station during the seasonal harvest.
• This position will need to ensure all trucks are properly scaled before and after unloading.
• Direct the truck traffic to the proper unloading zones.
• Organize and manage the paper flow of scale documents.
• Ensure data is input into the system accurately.

• General computer skills
• Knowledge in Microsoft Excel
• Communication and organization skills
• Ability to work under high paced work environment
• Communicate effectively with supervisors and peers.
• Lift 10 pounds frequently and 50 pounds occasionally
• Push/pull forces up to 100 pounds
• Climbing stairs and or ladders either to perform job duties or to access work areas a distance of up to 60 feet occasionally
• Sitting occasionally and standing frequently

• Operate welding, assembly, machining, or stamping equipment
• Read and interpret blueprints and sketches to produce parts
• Inspect finished products and document results
• Perform basic machine setups, adjustments, and routine maintenance
• Stack, pack, and prepare materials for shipment
• Complete production and quality documentation accurately

• High school diploma or GED required
• Ability to stand, walk, bend, and lift up to 50 pounds during a full shift
• Basic math skills and mechanical aptitude
• Ability to read and follow written and verbal instructions
• Strong attention to safety and quality standards
• Previous manufacturing experience preferred, but entry-level candidates are welcome
• Reliable transportation to Detroit Lakes, MN
• Ability to pass pre-employment screening requirements, if applicable

• Ensure a safe work environment for self and others
• Follow all safety rules and regulations
• Review and follow work instruction, management system procedures and standard operating documents
• Run CNC and manual machines, and handheld tools
• Inspect parts and identify defects and non-conformities
• Consistently and accurately complete all related paperwork/documentation
• Monitor fluids in machine and coolant flow in machine
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean and safe work area
• Produce parts that meet the Company’s quality standards
• Actively participate in events to improve the safety, quality, and efficiencies of our current processes and procedures
• Work at a consistent and steady pace, be prepared to work each day, and report to assigned work center in a punctual manner

• High school diploma or GED
• Manufacturing experience is preferred, but not required
• Strong mechanical aptitude
• Basic math skills, must have a working knowledge of decimals
• Ability to read measuring instruments and work instructions
• Must be detail oriented, with the ability to recognize defects and non-conformities
• Ability to work with limited supervision
• Ability to safely operate a forklift
• Ability to lift up to 50 pounds with or without reasonable accommodations 

• Ensure a safe work environment for self and others
• Follow all safety rules and regulations
• Review and follow work instruction, management system procedures and standard operating documents
• Run CNC and manual machines, and handheld tools
• Inspect parts and identify defects and non-conformities
• Consistently and accurately complete all related paperwork/documentation
• Monitor fluids in machine and coolant flow in machine
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean and safe work area
• Produce parts that meet the Company’s quality standards
• Actively participate in events to improve the safety, quality, and efficiencies of our current processes and procedures
• Work at a consistent and steady pace, be prepared to work each day, and report to assigned work center in a punctual manner

• High school diploma or GED
• Manufacturing experience is preferred, but not required
• Strong mechanical aptitude
• Basic math skills, must have a working knowledge of decimals
• Ability to read measuring instruments and work instructions
• Must be detail oriented, with the ability to recognize defects and non-conformities
• Ability to work with limited supervision
• Ability to safely operate a forklift
• Ability to lift up to 50 pounds with or without reasonable accommodations 

• Ensure a safe work environment for self and others
• Follow all safety rules and regulations
• Review and follow work instruction, management system procedures and standard operating documents
• Run CNC and manual machines, and handheld tools
• Inspect parts and identify defects and non-conformities
• Consistently and accurately complete all related paperwork/documentation
• Monitor fluids in machine and coolant flow in machine
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean and safe work area
• Produce parts that meet the Company’s quality standards
• Actively participate in events to improve the safety, quality, and efficiencies of our current processes and procedures
• Work at a consistent and steady pace, be prepared to work each day, and report to assigned work center in a punctual manner

• High school diploma or GED
• Manufacturing experience is preferred, but not required
• Strong mechanical aptitude
• Basic math skills, must have a working knowledge of decimals
• Ability to read measuring instruments and work instructions
• Must be detail oriented, with the ability to recognize defects and non-conformities
• Ability to work with limited supervision
• Ability to safely operate a forklift
• Ability to lift up to 50 pounds with or without reasonable accommodations 

• Assemble products or components according to work instructions and production needs
• Follow daily production schedules and meet output expectations
• Perform repetitive hand assembly tasks using small parts
• Ensure accuracy and quality in assembled products
• Use required PPE (e.g., safety glasses) and follow all safety procedures
• Maintain a clean and organized work area
• Communicate with supervisors or team members about production or quality issues
• Support team production goals and adapt to changing work assignments

• No prior experience required; willingness to learn on the job
• Ability to perform repetitive tasks for extended periods
• Strong attention to detail when working with small parts
• Ability to follow instructions and production procedures
• Good reliability and attendance
• Ability to work independently and as part of a team
• Ability to stand or sit for long periods (up to full shift)
• Ability to lift up to 35 pounds occasionally and perform light material handling tasks with or without reasonable accommodations #PerhamAreaJobs

• Read and interpret drawings and specifications
• Utilize pneumatic drill and drivers to install bow platform, livewell, seat hardware, fuel lines, navigational lights, and wiring harnesses
• Transfer the fuel tank to the interior of the boat, secure it to bulkheads, and install fuel lines, control cables, steering mechanism
• Utilize pneumatic drill and drivers to install the console, windshield, operating controls, wiring harnesses, seat hardware, and accessories
• Utilize pneumatic drills and drivers to install control cables, steering mechanisms, seat hardware, fuel lines, bilge pumps, navigational lights, and wiring harnesses
• Complete required documentation of finished boats for production purposes
• Trim, cut, and glue carpet/vinyl
• Move boats or parts out of the work area to the rigging area on carts

• High School Diploma or GED
• 3+ months of experience in a manufacturing setting preferred, but willing to train
• Knowledge of drills, drivers, rivet guns, saws, sanders, and hammers
• Ability in basic math, reading and be able to read a tape measure
• Ability to follow established safety processes to handle equipment to install all components for boats
• Good safety awareness, attitude, and attendance
• Knowledge of 5S, Kaizen and LSS a plus #PerhamAreaJobs

• Operate turret machines to punch holes or create layout marks in metal sheets, plates, strips, or bars
• Read and interpret prints to ensure accurate production and part specifications
• Set up and run equipment to support production requirements
• Monitor machine performance and ensure consistent output quality
• Perform repetitive manufacturing tasks for extended periods.
• Follow instructions and adapt to new processes or responsibilities as needed
• Maintain a safe and organized work environment
• Support production goals and adjust to changing operational needs

• High school diploma or GED
• Ability to read and interpret blueprints or technical prints
• Mechanical aptitude with ability to operate or learn turret machinery
• Willingness to learn new processes and take direction
• Ability to perform repetitive tasks for extended periods
• Ability to work in varying environments based on production needs
• Ability to lift up to 35 pounds consistently with or without reasonable accommodations
• Strong reliability and ability to follow instructions in a production setting #PerhamAreaJobs

• Review and follow work instruction, management system procedures and standard operating documents
• Run CNC and manual machines, and handheld tools
• Inspect parts and identify defects and non-conformities
• Consistently and accurately complete all related paperwork/documentation
• Monitor fluids in machine and coolant flow in machine
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean and safe work area
• Produce parts that meet the Company’s quality standards
• Actively participate in events to improve the safety, quality, and efficiencies of our current processes and procedures
• Work at a consistent and steady pace, be prepared to work each day, and report to assigned work center in a punctual manner
• Ensure a safe work environment for self and others
• Follow all safety rules and regulations

• High school diploma or GED
• Manufacturing experience preferred but not required
• Mechanical aptitude
• Basic math skills, must have a working knowledge of decimals
• Ability to read measuring instruments
• Ability to read and follow work instructions
• Must be detail oriented, with the ability to recognize defects and non-conformities
• Ability to work with limited supervision
• Good attendance
• Ability to safely operate a forklift 
• Ability to lift up to 50 pounds with or without reasonable accommodations #PerhamAreaJobs

• Perform MIG welding on fabricated metal components
• Read and interpret blueprints and shop drawings
• Inspect welds to ensure quality meets specifications and standards
• Prepare materials and complete finishing work as needed
• Collaborate with the fabrication team to complete projects accurately and on schedule

• Previous MIG welding experience required
• TIG welding experience preferred or willingness to learn
• Ability to read and follow blueprints and specifications
• Strong attention to detail and pride in workmanship
• Ability to work independently and as part of a team
• Dependable with a positive attitude and strong work ethic

• Perform MIG welding on fabricated metal components
• Read and interpret blueprints and shop drawings to ensure accurate fabrication
• Ensure weld quality meets specifications and industry standards
• Prepare materials and complete finishing work as required
• Inspect welds and completed work for accuracy and quality
• Collaborate with the fabrication team to complete projects on schedule
• Maintain a clean and organized work area
• Follow all safety procedures and shop guidelines

• MIG welding experience required
• TIG welding experience preferred or willingness to learn
• Ability to read and interpret blueprints and technical drawings
• Strong attention to detail and commitment to high-quality workmanship
• Ability to work independently and manage assigned tasks
• Dependability and consistent attendance
• Positive attitude and ability to work effectively in a team environment
• Basic mechanical aptitude and familiarity with fabrication processes

• Operate forklifts and scissor lifts to pull, load, and move finished goods
• Prepare outbound shipments by labeling, documenting, and verifying accuracy
• Maintain organized inventory and track goods using computer systems
• Keep the warehouse clean, safe, and well-organized
• Inspect pallets and equipment, reporting damage or repair needs
• Assist on the production floor when time allows

• High school diploma or GED
• Ability to operate forklifts (Hilo), lifts, and other warehouse equipment
• Ability to lift up to 50 lbs and perform physical tasks throughout the shift
• Basic computer skills and attention to detail
• Ability to read, write, and follow instructions in English
• Previous shipping or logistics experience preferred, but not required
• Reliable attendance and ability to work flexible hours when needed #IndeedNorth

• Review and interpret engineering schematics and technical drawings
• Set up and calibrate CNC machines for specific production jobs
• Operate CNC machinery to produce parts to exact specifications
• Perform routine maintenance and troubleshoot machine issues
• Inspect finished parts using precision tools such as calipers and micrometers
• Maintain a clean, safe work environment by following safety guidelines

• Certificate in machine shop technology, machine tool technology, or machinist program
• 1+ years of mechanical assembly or machining experience preferred
• Recognized apprenticeship may be required
• Strong math, analytical, and computer skills
• Ability to read blueprints and technical documentation
• High attention to detail and strong self-motivation

• Perform preventative and corrective maintenance on production equipment
• Troubleshoot mechanical, electrical, pneumatic, and hydraulic issues
• Repair or replace worn or damaged parts to minimize downtime
• Assist with facility maintenance needs as required
• Document maintenance activities and follow safety procedures
• Support production teams to ensure smooth daily operations

• Previous maintenance or industrial mechanical experience preferred
• Ability to troubleshoot and repair machinery and equipment
• Basic electrical and mechanical knowledge
• Ability to lift up to 50 lbs and work on your feet for the duration of the shift
• Ability to read and follow work instructions and safety guidelines
• Reliable transportation to Menahga, MN
• Ability to pass a pre-employment background check and/or drug screen, if required

• Monitor packaging equipment to ensure proper operation throughout the shift
• Notify the Plant Operator of trouble spots or potential issues
• Inspect packaging materials and record any sub‑quality materials
• Package products according to company standards
• Palletize finished product and operate the stretch‑wrapping machine
• Perform housekeeping duties, including end‑of‑shift cleanup
• Assist maintenance personnel as needed
• Stage shipments and help load trucks
• Operate forklifts once trained and certified

• Ability to lift up to 70 lbs. from waist to shoulder height
• Ability to stand for up to 10‑hour shifts
• Ability to work around moving production equipment
• Ability to work extra hours when required
• Frequent bending and stair/ladder climbing (up to 120 ft.)
• Comfort working in dusty conditions
• Ability to read labels/signs and follow written or verbal instructions
• Basic math skills and ability to record information accurately
• Reliable transportation to the Detroit Lakes area
• Ability to pass applicable pre‑employment screenings
• Entry‑level applicants welcome #worknow

• Monitor packaging equipment to ensure proper operation throughout the shift
• Notify the Plant Operator of trouble spots or potential issues
• Inspect packaging materials and record any sub‑quality materials
• Package products according to company standards
• Palletize finished product and operate the stretch‑wrapping machine
• Perform housekeeping duties, including end‑of‑shift cleanup
• Assist maintenance personnel as needed
• Stage shipments and help load trucks
• Operate forklifts once trained and certified

• Ability to lift up to 70 lbs. from waist to shoulder height
• Ability to stand for up to 10‑hour shifts
• Ability to work around moving production equipment
• Ability to work extra hours when required
• Frequent bending and stair/ladder climbing (up to 120 ft.)
• Comfort working in dusty conditions
• Ability to read labels/signs and follow written or verbal instructions
• Basic math skills and ability to record information accurately
• Reliable transportation to the Detroit Lakes area
• Ability to pass applicable pre‑employment screenings
• Entry‑level applicants welcome #worknow

• Perform tasks to include racking, masking, sanding and buffing customer products
• Ensure that client and customer quality standards are met in all steps of production
• Maintain standards of good housekeeping in work area
• Follow safety policies and the use of required safety equipment

• Previous manufacturing experience
• Ability to lift up to 30 pounds on a continuous basis and stand for the duration of a shift with or without reasonable accommodations
• Strong attention to detail and excellent attendance record
• Willingness to work in a shop floor environment with noise and other related interruptions

• Efficiently handle lumber
• Operate machinery
• Conduct regular inspections of lumber and finished products 
• Maintain a clean work environment for yourself and others
• Monitor machinery and troubleshoot any issues
• Ensure correct unit quantities

• High school diploma or equivalent
• Ability to read and interpret a tape measure
• Ability to work in a fast-paced, team environment
• Previous manufacturing experience a plus
• Ability to lift up to 30 pounds, and occasionally up to 50 pounds with or without reasonable accommodations

• Perform all types of exterior and interior commercial painting work and surface preparation
• Prepare various surfaces for painting by washing and scraping
• Remove old caulking and caulk to prepare to paint
• Perform work with strict company and regulatory safety procedures

• Ability to follow directions and work well with others
• Strong desire to learn and grow within a company
• Ability to efficiently operate automated electro-static paint equipment
• Ability to use a handheld paint gun, hoppers, booth collection system, computer, oven, vacuum cleaner, color measurement equipment, light booth, and paint conveyor

• Operate production equipment to produce high volumes of parts with exceptional quality standards
• Rebuild and repackage parts as needed, ensuring all components meet quality expectations
• Accurately package and prepare high-volume parts for shipment, including wrapping, boxing, labeling, and palletizing
• Verify that all customer kits contain the required components and quantities
• Use computer systems to maintain accurate inventory, track components, and update production records in a high-volume warehouse environment
• Fulfill daily and special customer orders, including requesting, assembling, boxing, weighing, and labeling parts
• Accurately use the internal product management system to create work orders, process location transfers, and maintain inventory integrity
• Prepare special order shipments by generating labels and packing lists through EDI websites.
• Process shipments via UPS or LTL freight, and send ASNs through EDI once tracking numbers are available
• Manage material requests for upcoming orders (3–6 weeks out) and coordinate backordered materials for build and shipment when available 

• Must have proven longevity and consistent work history.  No more than 3 jobs in the last 3 years.
• Mechanically inclined candidates strongly preferred
• Ability to lift up to 70 pounds and perform physical tasks with or without reasonable accommodations
• Ability to stand for extended periods with or without reasonable accommodations
• Strong ability to understand and retain instructions and job functions
• Proficient in using pneumatic and basic hand tools for assembly and packaging
• Prior experience in a manufacturing or warehouse environment preferred

• Ensure a safe work environment for self and others
• Follow all safety rules and regulations
• Review and follow work instruction, management system procedures and standard operating documents
• Run CNC and manual machines, and handheld tools
• Inspect parts and identify defects and non-conformities
• Consistently and accurately complete all related paperwork/documentation
• Monitor fluids in machine and coolant flow in machine
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean and safe work area
• Produce parts that meet the Company’s quality standards
• Actively participate in events to improve the safety, quality, and efficiencies of our current processes and procedures
• Work at a consistent and steady pace, be prepared to work each day, and report to assigned work center in a punctual manner

• High school diploma or GED
• Manufacturing experience is preferred, but not required
• Strong mechanical aptitude
• Basic math skills, must have a working knowledge of decimals
• Ability to read measuring instruments and work instructions
• Must be detail oriented, with the ability to recognize defects and non-conformities
• Ability to work with limited supervision
• Ability to safely operate a forklift
• Ability to lift up to 50 pounds with or without reasonable accommodations 

• Utilize pneumatic drill and drivers to install bow platform, live well, seat hardware, fuel lines, navigational lights, and wiring harnesses
• Transfer fuel tank to interior of boat, secure to bulkheads and install fuel lines, control cables, steering mechanism
• Utilize pneumatic drills and drivers to install console, windshield, operating controls, wiring harnesses, seat hardware, and accessories
• Utilize pneumatic drill and drivers to install control cables, steering mechanisms, seat hardware, fuel lines, bilge pumps, navigational lights, and wiring harnesses
• Complete required documentation of finished boats for production purposes
• Trim and cut carpet/vinyl and glue
• Prepare boat as needed for next department
• Move boats or parts out of work area to rigging area on carts

• High School Diploma or GED
• 3+ months experience in a manufacturing setting preferred, but willing to train
• Knowledge of drills, drivers, rivet guns, saws, sanders, and hammers
• Ability in basic math, reading and be able to read a tape measure
• Ability to read and interpret drawings and specifications
• Ability to follow established safety process to handle equipment to install all components for boats
• Good safety awareness, attitude, and attendance
• Knowledge of 5S, Kaizen and LSS a plus #worknow

• Ensure a safe work environment for oneself and others
• Follow all safety rules and regulations
• Ensure that part quality is in accordance with the inspection report
• Monitor the machine effectively
• Accurately complete reports and all necessary paperwork for the jobs
• Responsible for correct full box quantities and job counts
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean, and safe work area
• Actively participate in CIP events to improve the safety, quality, and efficiency of our current processes and procedures
• Support and positively contribute to a culture of continuous improvement
• Communicate with the supervisor and co-workers in a professional manner

• High school diploma or GED preferred
• Manufacturing experience preferred but not required
• Ability to use measuring instruments, such as gage pins, scales, etc.
• Ability to follow work instructions
• Must be detail-oriented, with the ability to recognize defects and non-conformities
• Regular attendance
• Ability to lift up to 50 lbs. with or without reasonable accommodations 

• Know and understand the functions of cleaning chemicals used for sanitation purposes
• Work in temperature and humidity extremes
• Utilize crank-up ladders, electric man lifts, pressure washers, and hand tools occasionally
• Perform procedures for cleaning and sanitizing the plant and equipment
• Work in a safe and orderly manner while in the plant and on the property
• Maintain a clean work area
• Communicate effectively with supervisory staff regarding plant sanitation and safety procedures

• Ability to add, subtract, multiply, divide, and determine percentages and parts per million using whole numbers, common fractions, and decimals
• Ability to climb stairs and ladders and push/pull, and reach above shoulder height frequently with or without reasonable accommodations
• Ability to lift 50 pounds occasionally, and 20 pounds frequently, with or without reasonable accommodations
• Ability to read and interpret container labeling, written procedures, MSDS, and equipment instructions
• Ability to see colors to properly identify chemicals and the labels #worknow

• Put product away in designated warehouse locations
• Load and unload trailers safely and efficiently
• Store finished products and raw materials as required
• Follow all safety policies and procedures
• Maintain a clean and organized work area

• High school diploma or equivalent
• Ability to lift up to 50 pounds regularly
• Basic warehouse knowledge and material handling experience preferred
• Ability to follow oral and written instructions
• Strong organizational skills and ability to work independently or as part of a team
• Reliable transportation to Detroit Lakes, MN

• Safely operate within the plant, following all safe‑work and HAACP procedures
• Unload belt trucks and hoppers, and manage the fluming process to move potatoes
• Operate pumps, metering wheels, flume pipes, skimmers, gates, and related water‑transfer equipment
• Use PanelView for communication and basic operation; start/stop lines and adjust belt speeds
• Maintain accurate records (truck logs, belt speeds, raw percentages, documentation with QA)
• Clean belts, pits, metering wheels, tanks, and perform general sanitation duties
• Troubleshoot and respond to equipment failures, power outages, and E‑stop situations
• Communicate effectively with peers and supervisors and participate in continuous improvement activities (5S, CIL, CL, RCA)

• Ability to understand and perform all essential job functions listed in the role
• Ability to communicate effectively with supervisors and peers
• Basic math skills: adding, subtracting, multiplying, and dividing whole numbers
• Ability to follow written, verbal, and diagram‑based instructions
• Physically capable of frequent lifting (10–50 pounds), push/pull up to 100 pounds, and continuous standing/walking with or without reasonable accommodations
• Comfortable working in a wet, noisy, humid, and machinery‑heavy environment with proper PPE
• Ability to work a rotating 12‑hour schedule (2‑2‑3 pattern) with occasional overtime

• Install new hardware and complex products while ensuring that they work correctly and safely
• Repair broken-down or damaged equipment 
• Perform painting, prepping, taping, grinding, and drilling
• Use power and hand tools
• Assess hardware and installation functionality and prepare reports about maintenance and repair work that is performed

• Ability to repair, replace, or install complex devices in mechanics
• Ability to correctly diagnosed problems as they arise 
• Knowledge of serving and repair hardware

• Read, understand and work from blueprints and bills of materials
• Resolve issues and answers questions that may occur during the manufacturing process
• Escalate complex questions and issue to leadership personnel for resolution or guidance
• Set up and operate all machining equipment in department (i.e. manual grinders, manual lathes, tool grinders, etc.)
• Hold given tolerances consistently using measuring devices (i.e. micrometer, profilometer, caliper, dial indicator, etc.) 
• Maintains high quality consistently

• High school diploma or GED
• Knowledge and experience with hand tools and measurement devices
• Ability to work collaboratively within a group in order to achieve a common goal
• Ability to utilize effective approaches for choosing a course of action for developing appropriate solutions
• Ability to present  information, analysis, and ideas in writing in a clear and concise manner; speaks clearly so that others can hear and understand what is being said
• Ability to speak, write, and understand English

• Perform light preventive maintenance on production equipment
• Complete all required documentation
• Assist in correcting unplanned machine breakdowns
• Assist in machine moves throughout the shop
• Provide technical assistance to production personnel
• Welding fabrication and repair as needed
• Maintain and operate coolant recycling system
• Assist with emptying chip bins as needed
• Replace all machine filters including filter mists
• Where applicable perform visual inspections on all air compressors and dryers
• Assist with troubleshooting and repairing hydraulic pneumatic components

• High school diploma or GED preferred
• 1+ year of maintenance related experience preferred
• Ability to operate both Forklifts and Aerial Lifts
• Must be able to perform assigned duties with minimal supervision
• Must have general knowledge of email and database applications
• Ability to communicate with a variety of people
• Ability to frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 30 pounds, with or without reasonable accommodations

• Follow all safety rules and regulations. Demonstrate commitment to safety program
• Provide metrology support and assistance to manufacturing and engineering by performing first article inspections, capability studies, and gaged R&R studies
• Perform basic CMM inspections as assigned and under guidance of QA Tech II or QE
• Perform basic calibration, gage set up, and repair as assigned and under guidance of QA Tech II or QE.
• Perform and complete documentation for Final Audits
• Coordinate containment and tagging of Nonconforming product. Generate Nonconformance Reports
• Review and supply inspection data using applicable software and or forms
• Participate in cross-functional teams as needed

• High school diploma or GED
• 1+ years of related experience and/or training or equivalent combination of education and experience
• Must have a valid driver’s license
• Knowledge and experience to accurately operate standard measurement equipment
• Ability to read and follow instructions, correspondence and memos
• Ability to communicate effectively in one-on-one and small group settings
• Knowledge of computer software - Microsoft Office, Outlook, and InfoPath-type software

• Plan machining by studying blueprints, materials, specifications, and machining parameters
• Interpreting geometric dimensions and tolerances (GD&T)
• Configure mills and lathes by entering instructions, including zero and reference points
• Tool registers, offsets, compensation, and conditional switches; calculating requirements, including basic math geometry, and trigonometry, proving part programs
• Load machine with work pieces
• Verify settings by measuring positions, first-run part, and sample work pieces
• Maintain specifications by observing operations; take measurements; detect malfunctions
• Troubleshoot processes; edit programs; replace worn tools; adhere to quality assurance procedures and processes
• Meet production goals in terms of cycle time, quantity, and quality

• Ability to move or transfer products with a forklift or hand cart
• Ability to lift 50 pounds with or without reasonable accommodations
• Ability to regularly stand, walk and reach with hands and arms
• Ability to perform basic mathematical computations, and apply concepts such as fractions, percentages, ratios and proportions to practical situations
• Understand and have the ability to perform tool wear offsets

• Read, interpret, and visualize blueprints, sketches, and work instructions to ensure accurate production
• Manufacture high-quality parts according to patterns, documentation, and production expectations
• Inspect parts using basic measuring and inspection tools (e.g., calipers, height gauges) to verify quality and adherence to specifications
• Produce consistent, high-quality welds using pre-set welding parameters
• Adapt to changing production demands and priorities while maintaining efficiency and accuracy
• Identify equipment or welding-related issues and report concerns to the appropriate personnel
• Maintain a clean, organized, and safe work environment by following standard housekeeping procedures
• Use computer software to clock in/out, track job assignments, and verify production counts

• High school diploma or GED
• Must achieve a minimum score of 80% on required Welding Excellence assessments, including: Welding Tools/Consumables, Weld Defects, and Welding Department
• Basic welding knowledge and experience working with welding equipment and tools
• Ability to understand, follow, and communicate routine verbal and written instructions
• Strong ability to work cooperatively and maintain productive working relationships with team members
• Attention to detail and commitment to producing quality work
• Basic proficiency using a computer for time tracking and job reporting

• Keep finished products organized and located properly in warehouses
• Perform accurate and timely shipping, receiving, and movements of products
• Rotate ingredients and packaging in their proper locations after receiving
• Proper and accurate loading and unloading of trucks
• Reconcile inventory discrepancies as discovered
• Operate the shrink wrapper, cardboard bailer, etc.
• Perform physical and cycle counts of inventory
• Backup or substitute inventory control positions
• Identify opportunities for efficiency and productivity gains
• Report on any safety issues, unsafe conditions, and accidents immediately

• Previous forklift and shuttle truck operation experience
• Certified and licensed to drive forklifts/trucks
• General understanding of warehousing programs and systems

• Set-up and disassemble loads and/or operate heat treating equipment, such as heat-treating furnaces, vacuum furnaces, and induction machines, that anneal, temper, harden or heat-treat metal objects
• Set automatic controls, observe gauges, and operate gas or electric furnace used to harden temper, anneal heat treat metal parts
• Load parts into containers in accordance with load diagrams, closes furnace door, and insert parts into furnace when specified temperature is reached
• Adjust machine settings with assistance when necessary
• Remove parts from the furnace after specified time and air-dry/cool parts in water or oil brine
• Read production schedule to determine processing sequence and furnace temperature requirements for objects to be heat treated
• Light gas burners and adjusts flow of gas and coolant water

• Ability to read work orders to determine processing specifications
• Ability to lift up to 20 pounds with or without reasonable accommodations
• Ability to follow work instructions

• Perform preventive, routine, and troubleshooting maintenance in a large manufacturing facility
• Maintenance tasks performed are in a variety of skilled trade areas
• Apply high energy, self-motivation, and initiative to learn and be trained in various types of equipment and maintenance techniques, to include resin and spray equipment, HVAC, plumbing, PLCs, VFDs, etc.
• Operate a forklift
• Daily job duties will be varied and dynamic, requiring high levels of customer service and attention to detail
• Workload will be tracked via daily schedules and assignments requiring responsibility and accountability for the quality and timeliness of completion
• Compliance with safety policies and procedures is required, as well as identifying risks and hazards prior to job completion

• High School diploma or GED
• Two-year technical degree or equivalent
• Previous forklift experience required
• 1-3+ years of substantive experience in one or more of the skilled trades areas (mechanical, electrical, fabrication)
• Documented work experience in CNC programming and diagnostics, HVAC, electrical, and maintenance experience
• Strong mechanical and electrical background and experience, with experience in electrical motor controls and ladder logic programming
• Experience reading blueprints and schematics, and building specifications
• Ability to fabricate and order materials for open work orders and jobs
• Ability to read measurement devices, including OHM/voltage meters, measuring tapes, calipers, and various equipment gauges
• Ability to lift up to 50 pounds with or without reasonable accommodations

• Ensure a safe and clean work environment by following all safety rules, regulations, and 5S principles
• Compare material records to inventory, verify counts, and identify discrepancies
• Load and unload trucks, stage products, and supply work centers with packaging and materials
• Complete reports, maintain accurate paperwork, and dispose of scrap materials as needed
• Monitor production indicators to prevent delays and communicate effectively with supervisors and co-workers
• Participate in continuous improvement activities and operate production machinery or a forklift as needed
• Perform other duties as assigned

• High school diploma or GED preferred, plus 3 months of warehouse experience
• Ability to operate forklifts, shrink wrap machines, scales, and hand tools, with forklift certification required at the facility
• Computer skills for processing material movements and the ability to follow detailed work instructions
• Detail oriented with strong communication skills and a commitment to safety
• Ability to frequently lift up to 40 pounds, occasionally 50 pounds, and rarely 60 pounds
• Ability to stand for the entire shift and perform repetitive movements such as bending, twisting, walking, and climbing stairs

• Ensure part quality is in accordance with inspection report
• Perform complete set up of die cast machines and trim presses
• Monitor and document all aspects of set up to minimize production down-time
• Accurately complete reports and all necessary paperwork
• Utilizes the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean and safe work area
• Participate in CIP events to improve the safety, quality, and efficiencies of our current processes and procedures
• Support and positively contribute to a culture of continuous improvement

• High school diploma or GED preferred
• 1+ years of manufacturing experience preferred
• Forklift and crane operator certifications
• Ability to use hand tools and air powered tools, etc.
• Ability to follow work instructions
• Must be detail oriented, with the ability to recognize defects and non-conformities

• Compare identifying material information records to material
• Load and unload trucks as needed
• Verify inventory counts and box quantities as needed and identify any discrepancies
• Supply work centers with packaging and materials
• Stage product per reports
• Accurately complete reports and all necessary paperwork
• Remove and empty scrap containers and dispose of used materials as needed
• Proactively monitor work centers and other production indicators to avoid delays in production
• Maintain effective lines of communication with all departments
• Operate production machinery as needed

• High school diploma or GED preferred
• 3 months of warehouse experience preferred
• Ability to use computer equipment for standard processes involving material movements
• Ability to use shrink wrap machine, scales, hand tools, etc. for weighing and packaging parts for shipment
• Ability to follow work instruction
• Must obtain a forklift certification from the facility in which you are assigned

• Perform emergency services and stabilization
• Perform light construction demo upon approval
• Set up air movers and/or dehumidifiers and monitor drying process daily
• Perform hard surface cleaning
• Follow repair plans to meet the needs of clients
• Perform Board Up and Tarp Off Services
• Understand and maintain knowledge of the ServiceMaster Qualified Restoration Vendor (QRV) Program
• Keep on schedule with daily uploads and readings regarding the drying of each project’s structure
• Gather/document working photos to include a) prior to work b) during work c) after work
• Ensure that all paperwork is completed and signed by each insured
• Collect and properly label ITEL samples

• Ability to work and lead efficiently and effectively in a team environment
• Exceptional verbal and written communication skills
• Great attention to detail and accuracy
• Customer service ability – going above and beyond to provide “high touch” service to our clients
• Ability to remain calm and focused under pressure and meet strict deadlines
• Strength in multi-tasking and prioritizing
• Willingness to work in all types of conditions (hot, cold, wet, dusty, etc.)

• Ensure a safe work environment for self and others
• Follow all safety rules and regulations
• Ensure part quality is in accordance with inspection report
• Monitor the machine effectively
• Accurately complete reports and all necessary paperwork for the jobs
• Responsible for correct full box quantities and job counts
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean and safe work area
• Actively participate in CIP events to improve the safety, quality, and efficiencies of our current processes and procedures
• Support and positively contribute to a culture of continuous improvement
• Communicate with the supervisor and co-workers in a professional manner

• High school diploma or GED preferred
• Manufacturing experience preferred but not required
• Ability to use measuring instruments, such as gage pins, scales, etc.
• Ability to follow work instructions
• Must be detail oriented, with the ability to recognize defects and non-conformities
• Regular attendance
• Ability to lift up to 50 lbs. with or without reasonable accommodations

• Load and unload materials and parts manually or using the appropriate equipment/tools
• Operate CNC equipment and observe operations with focused attention
• Advise supervisor of any machine issues, crashes, or needed repairs
• Operate griding and related tools to remove excess material or burrs from surfaces
• Assure quality by inspecting finished parts and report irregularities or tolerance deviations to quality control personnel
• Perform tool wear offsets or change inserts to meet tolerance requirements
• Monitor progress toward and meet production goals
• Follow, create, and help maintain work instructions
• Complete required daily paperwork
• Maintain equipment and worksite by completing housekeeping

• High School Diploma or GED
• Must be 18 years of age or older
• Ability to perform basic mathematical computations and apply concepts such as fractions, percentages, ratios, proportions, geometry, and trigonometry to practical situations
• Ability to follow written and verbal instructions
• Interpersonal communication skills characterized by honest, professional, respectful communication and listening skills
• Fluency in English verbal and written communication
• Ability to meet production goals for quality and quantity

• Ensure a safe work environment for oneself and others
• Follow all safety rules and regulations
• Set automatic controls, observe gauges, and operate a gas or electric furnace used to harden temper, anneal heat treat metal parts
• Load parts into containers in accordance with load diagrams, close the furnace door, and insert parts into the furnace when the specified temperature is reached
• Remove parts from the furnace after the specified time, and air dry or cool parts in water, oil, brine, or other baths
• Read the production schedule to determine the processing sequence and furnace temperature requirements for objects to be heat-treated
• Read the work order to determine processing specifications
• Light gas burners and adjust the flow of gas and coolant water
• Operate packaging washer equipment where applicable

• High school diploma or GED
• 3+ months of heat treat experience preferred, but not required
• Ability to follow work instructions
• Good attendance
• Ability to safely operate a forklift
• Ability to lift up to 70 lbs. with or without reasonable accommodations

• Ensure a safe work environment for self and others
• Follow all safety rules and regulations. Demonstrate commitment to the safety program
• Review and follow work instructions, management system procedures, and standard operating documents
• Run CNC and manual machines, and handheld tools
• Inspect parts and identify defects and non-conformities
• Consistently and accurately complete all related paperwork/documentation
• Monitor fluids in the machine and coolant flow in the machine
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean, and safe work area
• Produce parts that meet the Company’s quality standards
• Actively participates in CIP events to improve the safety, quality, and efficiencies of our current processes and procedures.
• Support and positively contribute to a culture of continuous improvement
• Ensure the work center is prepared for the next operator

• High school diploma or equivalent
• Manufacturing experience desired but not required
• Mechanical aptitude
• Basic math skills, must have a working knowledge of decimals
• Ability to read measuring instruments
• Ability to read and follow work instructions
• Ability to lift up to 50 lbs. with or without reasonable accommodations
• Must be detail-oriented with the ability to recognize defects and non-conformities

• Ensure a safe work environment for self and others
• Follow all safety rules and regulations. Demonstrate commitment to the safety program
• Review and follow work instructions, management system procedures, and standard operating documents
• Run CNC and manual machines, and handheld tools
• Inspect parts and identify defects and non-conformities
• Consistently and accurately complete all related paperwork/documentation
• Monitor fluids in the machine and coolant flow in the machine
• Utilize the 5-S principles (sort, set in order, shine, standardize, and sustain) to maintain an orderly, clean, and safe work area
• Produce parts that meet the Company’s quality standards
• Actively participates in CIP events to improve the safety, quality, and efficiencies of our current processes and procedures.
• Support and positively contribute to a culture of continuous improvement
• Ensure the work center is prepared for the next operator

• High school diploma or equivalent
• Manufacturing experience desired but not required
• Mechanical aptitude
• Basic math skills, must have a working knowledge of decimals
• Ability to read measuring instruments
• Ability to read and follow work instructions
• Ability to lift up to 50 lbs. with or without reasonable accommodations
• Must be detail-oriented with the ability to recognize defects and non-conformities

• Perform MIG and TIG welding in the manufacturing of aluminum boats
• Prep work, parts, and repairs
• Complete required documentation of welded boats for production purposes
• Sand boats as needed
• Identify risks and hazards prior to job completion
• Work with a team and other departments to ensure quality products

• Ability to locate and use the HazCom labels and MSDS information 
• Willingness to work overtime as needed to complete daily tasks or projects

• Perform routine and department-specific Quality Inspection, auditing, compliance, and Critical Process inspections throughout the plant in a standardized, efficient, and repeatable manner
• Provide training to others on critical-to-quality product and process criteria
• Move boats to various locations (repaint, outside, warehouse, etc.) manually or by pallet jack and assist in heat-shrinking boats as required
• Work on special projects geared towards product or process improvement
• Serve as a gatekeeper for customer satisfaction and a quality leader within the facility

• High School Diploma or GED
• Ability to read drawings and specifications
• Solid mechanical skills, utilize basic math and reading skills, ability to utilize hand and power tools
• Must have computer, math, and reading proficiency and ability to use databases
• Ability to receive and follow instruction
• Strong communication skills and ability to work in a team environment
• Ability to perform independently as well as in a team role, possess good organizational skills and ability to follow instructions
• Willingness to work overtime as required